| |
SSD (formerly FFD) UATA 2.5”
Outstanding Flash Disk Performance

The SanDisk SSD UATA 2.5" (formerly FFD 2.5" Ultra ATA) is a state-of-the-art solid-state flash disk, based on NAND flash technology, that provides the functionality of a hard disk with no moving parts. SSD UATA 2.5" is an ideal, rugged storage solution for mission-critical applications that must operate under harsh environmental conditions.
SSD UATA 2.5" delivers outstanding reliability and enhanced endurance thanks to SanDisk TrueFFS technology, which applies dynamic wear-leveling and bad block management. Due to its unique design, SSD UATA 2.5" provides high-performance sustained read and write rates up to 100 MBytes/sec and supports Up to Ultra DMA 5.
SSD UATA 2.5" is fully compatible with the ATA-6 interface, and has the same mechanical dimensions and mounting holes of traditional mechanical disks. It is a true drop-in replacement for rotating 2.5" ATA disks with highest reliability.
Specifications
Capacity
| Unformatted (Mbytes) |
1, 2, 4, 8, 12, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120, 128 |
IDE Compatibility
ATA-6/ATA-5/ATA-4/ATA-3/ATA-2
Performance
| Burst Read/Write: |
100 MBytes/sec |
| Sustained Read: |
45 MBytes/sec |
| Sustained Write: |
40 MBytes/sec |
| Access time: |
<0.04 ms |
Physical
| Form factor: |
2.5" |
| Mounting: |
SFF standard, 44 pins connector |
| Case dimensions (mm): |
100.2(L) X 69.8(W) X 9.4 to 21.4(H) |
| Weight: |
0.1 Kg for 16GB; 0.22 Kg for 128GB |
Environmental
| Operating temperature |
| Commercial: |
0°C to +70°C |
| Enhanced: |
-25°C to +75°C |
| Extended: |
-40°C to +85°C |
| Storage temperature: |
-55°C to +95°C |
| Humidity: |
5% to 95% relative, non-condensing |
| Operating altitude: |
up to 80,000 feet |
| Operating shock: |
1,500G, MIL-STD-810F |
| Operating vibration: |
16.3G RMS (random, 20Hz to 2000Hz;
3 vibration axes), MIL-STD-810F |
Reliability
| MTBF |
1,485,397 operating hours MTBF for 16GB based on Telcordia SR-332, GB, 25°C |
| EDC/ECC |
Embedded EDC/ECC, based on BCH algorithm |
| BER (Bit Error Rate) |
<10-20 |
| Reliability features: |
Built-in power-up self-test (BIT)
Manual and automatic self-diagnostics
TrueFFS bad block management
Data integrity under power-cycling
S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology) remote monitoring |
Endurance
Unlimited read cycles
TrueFFS dynamic wear-leveling
Garbage collection process
Enhanced Security Erase
Entire disk security erase in seconds
Partial security erase
Auto-resume security erase/sanitize on power interrupt
Sanitize complies with NISPOM DoD 5220.22-M, NSA 130-2, Air Force AFSSI 5020, Army 380-19, Navy NAVSO P-5239-26 and IREC (IRIG) 106 NTISSP-9
Secure erase/sanitize software interrupt, hardware interrupt optional
| RoHS Compliant |
 |
| |
Warranty
5 years
Ordering Information
| SDATH-CCCG-000000 |
| SD: |
Prefix: SanDisk |
| A: |
ATA interface |
| T: |
Operating Temperature Range |
| |
Blank - Commercial: |
0°C to +70°C |
| |
N - Enhanced: |
-25°C to +75°C |
| |
X - Extended: |
-40°C to +85°C |
| H: |
Case Height |
| |
A - 9.4mm up to 16GB |
| |
B - 13.4mm up to 64GB |
| |
C - 17.4 mm up to 112GB |
| |
D - 21.4 mm up to 128GB |
| CCC: |
Unformatted Capacity (Gbytes): |
001,002, 004, 008, 012, 016, 024, 032, 040, 048, 056, 064, 072, 080, 088, 096, 104, 112, 120, 128 |
| G: |
Gbytes |
|
Note: 1 megabyte (MB) = 1 million bytes; 1 gigabyte (GB) = 1 billion bytes. Some of the listed capacity is used for formatting and other functions, and thus is not available for data storage. Read more.
|
|